BLASTMAP™

User guide
 
×
Menu
Index
Search
 
   
   
   
 
  (c) BME, 2020

Hole toolbar

Hole toolbar
1

Diameter button

1. Diameter button
Sets the diameter of the ring holes.
2

S : B Ratio button

2. S : B Ratio button
Sets the spacing to burden ratio.
3

Target PF button

3. Target PF button
Sets the target powder factor.
4

Re-Number Holes button

4. Re-Number Holes button
Automatically re-numbers the holes from left to right. Useful after removing holes from the design.
5

Explosives Density button

5. Explosives Density button
Sets the explosives density
6

Explosive button

6. Explosive button
Select the explosives used.
7

Spacing button

7. Spacing button
Sets the spacing.
8

Select Starting Point button

8. Select Starting Point button
Select the starting point on the ore outline. This will set the starting point and the holes will be created from that point on wards.
You can select any point on the ore outline or the 90 deg point straight up from the drill pivot point.
9

Apply button

9. Apply button
Creates the ring design.